GB
12
RAC 83 AX
750301 - RAC 83 AX – rev 09 - ( 04-2019 )
HOW TO USE YOUR RIVETING TOOL
After the clamping, the sheared nail is piped by the riveting tool and ejected from the back into the special container (
B
).
By swinging the valve (
A
) you can adjust the suction power. By the suction nail system, the rivet remains in the nozzle also
turning over the head of the riveting tool downwards: this detail increases a lot the usefulness of the riveting tool.
Do not keep
the rivet with your fingers!
A
B
When the container (
B
) is full of nails do not use the riveting tool. Disconnect the tool, unscrew the container (
B
) and empty it.
DO NOT DISPERSE ANY NAIL!
Screw the container and start again to work.
f1
f2
WARNING!!
Do not remove the container (
B
) during the riveting operation, as the nail ejection can
cause damages to the worker or to persons who are nearby the work surface.
