FAR R2536WDW, Инструкция по эксплуатации

Страница: 20 / 28

ENGLISH ENGLISH
GB-11 GB-10
STORING FROZEN FOOD
All frozen food you purchase should be placed in the freezer as soon as possible to
avoid them from defrosting and spoiling.
All storage recommendations printed on the packaging of frozen food by the
manufacturer should always be followed.
When using the freezer for the first time or after defrosting, set the thermostat knob
to the maximum position for at least 2 hours before introducing food to be stored,
and then readjust it to the normal position.
The technical data mentioned in the ‘Technical Information’ are obtained in the case
that the freezing drawers are removed.
MAKING ICE CUBES
1.
Fill the ice tray with ¾ full of clean water.
2.
Place the tray in the top freezing drawer.
3.
Close the door.
To remove the ice cubes from the tray, put the tray under running water for a while
and then twist the tray slightly to loosen the ice cubes.
To freeze raw meat, wrap in plastic bags or in airtight containers and place on the
lowest shelf to avoid cross contamination.
Do not allow raw meat to come into contact with cooked foods. For safety, only store
raw meat for two or three days. Fruit and vegetables should be thoroughly cleaned
and placed in the crisper.
Milk and other liquids should be sealed with lids and placed in the bottle shelf in the
door.
NOTE: The ambient temperature of the freshly stored food and how often the
door is opened affect the temperature in the refrigerator. If required, change the
thermostat temperature settings.
WATER DISPENSER
The refrigerator includes a water dispenser which makes it easier to fill your cup
of water and have access to cold water almost immediately. The water tank has a
capacity of 1.5 litre which has to be filled out with pure water. To use water dispenser
follow the instructions below:
Filler cover
Water tank cover
Water tank
open
close
1.
Open the refrigerator door and ensure the
water tank is well fixed.
2.
Open the filler cover of the water tank,
slowly fill the water tank to prevent any
spillage until the tank is filled. Then close
the filler cover. See image C.
3.
When filling for the first time, turn the
thermostat knob to maximum number and
wait 30 minutes for water getting cold. Take
water by pushing the handle with a cup. See
image D.
When using the water dispenser, some
water may drip and accumulate at the
bottom of the water dispenser. Please wipe
it with a cloth when necessary.
NOTE: Do not take away the cup until no
water drop.
Water Dispenser
Water
switch