ENGLISH
ENGLISH
GB-15
GB-14
Adjusting Salt Consumption
The dishwasher is designed to allow for
adjustment in the amount of salt consumed
based on the hardness of the water used. This is
intended to optimise and customise the level of
salt consumption.
Please follow the steps below for adjustment in
salt consumption.
1. Switch on the appliance;
2. Press the
Start/Pause
button for more than
5 seconds to start the water softener set
model within 60 seconds after the appliance
was switched on;
3. Press the
Start/Pause
button to select
the proper set according to your local
environment; the sets will change in the
following sequence: H1 H2 H3
H4 H5 H6.
4. Press the
On/Off
button or no operation for
5 seconds to end the set up model.
WATER HARDNESS
Selector
Position
Salt
consump-
tion
(gram/
cycle)
°dH
°fH
°Clark mmol/l
0~5
0~9
0~6
0~0.94 H1-Soak
light bright
0
6-11
10-20 7-14
1.0-2.0 H2-90
Min light
bright
9
12-17 21-30 15-21 2.1-3.0 H3-90
Min and
Soak light
bright
12
18-22 31-40 22-28 3.1-4.0 H4-ECO
Light
bright
20
23-34 41-60 29-42 4.1-6.0 H5-ECO
light bright
and Soak
Light
bright
30
35-55 61-98 43-69 6.1-9.8 H6-ECO
light bright
and 90
Min light
bright
60
Note:
°DH: German degree
°fH: French degree
°Clark: British degree
1°dH =1.25° Clarke=1.78° fH=0.178mmol/l
The manufactory setting: H4 (EN 50242)
