Separate the filters.
Lift up the main filter.
Rinse them under running water using a soft brush.
Clean the filters regularly. Replace the filter unit
by turning them clockwise until they lock into
position.
CAUTION
: Never operate the dishwasher
without the filters.
Cleaning the Door
Cleaning the Spray Arms
Use a damp cloth to clean the edge around the
door.
To avoid penetration of water into the door lock and
electrical components, do not use a spray cleaner.
The spray arms can be easily
removed for periodic cleaning of
the nozzles, to prevent possible
clogging.
To remove the upper and lower
spray arms, hold and unscrew or
pull them out.
Wash the spray arms under running water and
attach them back in place,
checking that the
rotary movement is in no way impeded.
Frost Precautions
Avoid placing the dishwasher in a location
where the temperature is below 0°C. If this is
unavoidable, empty the dishwasher, close the door,
disconnect the water inlet pipe and empty it.
Problem
Possible Causes
Solutions
Dishwasher
will not start.
Fuse blown, or
the circuit breaker
tripped
Replace fuse or reset circuit
breaker. Remove any other
appliance sharing the same
circuit with the dishwasher.
Power supply is not
turned on.
Make sure the dishwasher is
turned on and the door is closed
securely.
Make sure the power cord is
properly plugged into the wall
socket.
The door has not
been properly
closed.
Close the door securely.
Water not
pumped from
dishwasher
Kink in drain hose Check drain hose.
Filter clogged
Check the filters (see “Cleaning
the Filter Unit”).
Kitchen sink
clogged
Check kitchen sink to make sure
it is draining well. If kitchen
sink is not draining, you may ask
a plumber to check it.
TROUBLESHOOTING
GB-31
GB-30
ENGLISH
ENGLISH
