FAR KJ 73-A, Перевод оригинальной инструкции

Страница: 14 / 32

GB
14
KJ 73-A
75036141 - KJ 73-A – rev 01 - ( 02-2021 )
Company name and
address
Designation of the tool
Serial number
KJ 73-A
KJ 73-A
KJ 73-A
17”
8”
5”
11,6”*
Ø 1,97”
4,8”*
Ø 1,12”
A
B C
I
E F
G
D
L
M
N
TOOL IDENTIFICATION
The riveting tool KJ73-A is identified from a marking
that shows company name and address of manufacturer,
designation of the tool, CE. Always refer to the information on
the riveting tool when requesting technical service.
TECHNICAL DATA
• Working pressure ........................................ 87 ÷ 101.5 psi
• Min. int. diam. of the compressed air feeding hose . 0.315 "
• Max free air consumption per cycle ...................... 5.492 in³
• Maximum force ........................................ 87 psi - 7.119 lbf
WEIGHT :
• Gun ............................................................................. 3.3 lb
• Weight ..................................................................... 19.1 lb
• Working temperature .................................... -23°F/+122°F
• Root mean square in total acceleration frequency (Ac) to
which the arms are subjected .......................... < 98.42 ips²
• A-weighted emission sound pressure level .............. 74 dBA
• Peak C-weighted instantaneous sound pressure . <130 dBC
• A-weighted sound power ........................................ 85 dBA
MAIN COMPONENTS
A)
..................................................................Threaded tie rod
B) ....................................................................................Head
C) ......................................................Ring-nut clamping head
D) ..............................................................Tube carrying head
E) ............................................................Balancer connection
F) ........................................................................Oil tank plug
G) ................................................................ Pneumatic motor
I) ...............................................................Unscrewing button
L) ............................................................Control push-button
M) ........................................................Stroke-adjusting knob
N) ................................................ Compressed air connection
*
with 3/8"-16 UNC tie rod
GENERAL NOTES AND USE
The tool can be employed only for threaded inserts 6-32 ÷
÷ 1/2"-13 UNC diameter.
The KJ73-A hydropneumatic system assures more power
than the pneumatic system used for other models.
That means a reduction in the problems due to the wear and
tear of the components, therefore, there will be an increase
in reliability. The technical solutions adopted reduce the
dimensions and the weight of the tool, which is very handy
for these reasons.
The possibilities of leakage from the oil-dynamic system, are
eliminated by some sealed gaskets, which solve this problem.