FAR KJ 45/S, Перевод оригинальной инструкции

Страница: 9 / 22

TIE-ROD/HEAD UNIT ADJUSTMENT (fig. f14-f15-f16 )
Changing the length of the insert to clamp, the position of the
head (
B ) compared to the threaded tie rod ( A ) should be ad-
justed.
Disconnect the compressed air feeding from the tool. Screw
an insert of the desired length on the threaded tie rod manual-
ly until the insert head touches the riveting tool head (
B ). The
head is adjusted correctly if the threaded tie rod comes out of
the insert screwed on it of about
2 mm . Otherwise unblock
the ring nut ( C ) with a 22 mm standard spanner then screw or
unscrew the head ( B ) up to the right position, and block the
ring nut ( C ).
WARNING!
Disconnect the machine before carrying
out the above mentioned operations.
sales@air-allied.com.au Air & Allied Sales (Pacific) Pty Ltd www.air-allied.com.au