FAR KJ 45/S-A, Инструкция по эксплуатации

Страница: 13 / 32

13
GB
Revisione - 03 Date 06-2022
KJ 45/S-A
TOOL IDENTIFICATION
The riveting tool KJ 45/S-A is identified from a marking
that shows company name and address of manufacturer,
designation of the tool, CE. Always refer to the information on
the riveting tool when requesting technical service.
GENERAL NOTES AND USE
The tool can be employed only for threaded inserts 6-32 ÷
÷ 1/2"-13 UNC
diameter.
The KJ 45/S-A hydropneumatic system assures more power
than the pneumatic system used for other models. That means
a reduction in the problems due to the wear and tear of the
components, therefore, there will be an increase in reliability.
The technical solutions adopted reduce the dimensions and
the weight of the tool, which is very handy for these reasons.
The possibilities of leakage from the oil-dynamic system, are
eliminated by some sealed gaskets, which solve this problem.
TECHNICAL DATA
• Working pressure ..............................................
87 ÷ 101.5 psi
• Min. int. diam. of the compressed air feeding hose .......
0.315 "
• Max free air consumption per cycle ....................... 5.492 in³
**
• Maximum force .......................................
94.25 psi - 6174 lbf
• Weight ...........................................................................
6.31 lb
• Working temperature ........................................... -23°F/+122°F
• Root mean square in total acceleration
frequency (Ac) to which the arms are subjected .... <
98.42 ips²
• A-weighted emission sound pressure level ...................
74 dBA
• Peak C-weighted instantaneous sound pressure .......
<130 dBC
• A-weighted sound power .............................................. 86 dBA
**
in³
= at 68°F, pressure of 1 atmospher
MAIN COMPONENTS
A)
.........................................................................Threaded tie rod
B) .......................................................................................... Head
C) .............................................................Ring-nut clamping head
D) ...................................................................Control push-button
E) ....................................................... Compressed air connection
F) ............................................................... Pressure control valve
G) ......................................................................Protection bottom
H) ....................................................................... Pneumatic motor
I) ................................................................................Oil tank plug
L) ...................................................................Balancer connection
M) ...............................................................Stroke-adjusting knob
N) ......................................................................... Stroke indicator
O) .................................................................... Tube carrying head
P) .....................................................................Unscrewing button
Q) ......................................................................
Air-entry valve
Ø 2"
Ø 5.1"
11.7"
4.9"
Ø 1.1"
12.3"
M
G
E
F
Q
A B C P
D
L I H N O
Company name and
address
Designation of the tool
Serial number