Page 21
used. Once again the network cables are optional if no remote control is required. The
sequence in which the speakers are linked with the network cable is not relevant for this
application.
4.2
Digital setup
4.2.1
Stereo 2.0 System
There are 2 ways to setup a digital 2.0 system. The first one relies on the FAR Link
TM
network to carry audio and control between the LEFT and the RIGHT speakers. The FAR
Link
TM
network cable is then the only link between the 2 speakers. The first speaker
automatically bridge the AES/EBU input to the FAR Link
TM
network output (Output “Auto
Sel” setting)
ID:
Input:
Output:
Digital Ch.:
LEFT
AES/EBU
1. FRONT LEFT
Auto Sel
Auto Sel
A(L)
ID:
Input:
Output:
Digital Ch.:
RIGHT
2. FRONT RIGHT
Auto Sel
Auto Sel
B(R)
DIGITAL IN
NETWORK IN
NETWORK OUT
NETWORK IN
The other option is to use the conventional XLR cables to link the speakers via the
DIGITAL OUT / DIGITAL IN connectors. The first speaker automatically bridges the
AES/EBU input to the AES/EBU output (Output “Auto Sel” setting) In this case, there
will not be any remote control enabled.
Содержание AV6.D
Страница 2: ...Page 2...
