Far Tools PRO ML 550, Руководство пользователя

Страница: 12 / 19

4. Installation and Test run of the machine tool
4.1 First examine whether you have received all the accessories of the machine tool according to the
packing list after opening the case.
4.1 The machine tool should be installed and fixed with nuts and bolts on the solid table made of wood or
iron. The table dimension can be determined based on the machine tool dimension (Refer to Fig.4). In
any way, the machine tool mustn’t be installed on fragile wood table to avoid the vibration when it is
running, resulting, in affection the service accuracy. When the lathe needs moving, the machine tool
saddle should be close to the tailstock support and clamped.
4.2 During the installation, a level gauge should be used for squaring the machine tool.
4.3 Anti-rust oil is applied to the sliding surface and non-portion and it can be cleaned with turpentine oil
or paraffin during the installation.
4.4 Using gasoline or paraffin to clean the main shaft box, and then inject filtered of #7 of#10 machine
lubrication oil.
4.5 Sufficient lubrication oil should be splashed into the oil holes or lubrication surface of the machine
tool and then examines the operation handles and the saddle longitudinal movement and tool carrier
lateral movement. If necessary, making the adjustment to the press plate and play iron.
4.6 Before starting the machine, check the motor and electrical equipment carefully to avoid such accidents
as electricity leakage, etc. due to the circuit damage when moving the machine tool.
4.7 When starting the test run, first use the lowest speed and keep it for running 20 minutes, if everything
is OK, increase the speed step by step.
4.8 Waiting until the machine tool stops completely, then change the main shaft speed or change the
feed.
4.9 Before the machine tool is normally operated, operators should read the service manual carefully and
have the idea of operation, lubrication and maintenance to guarantee the machine tool for a long-term
service.
5. Operation maintenance and structure of the machine tool