Far East Kitchen Solutions
Installation & user operation guide induction cooking
Page 7 of 20
B)
ELECTRICAL CONNECTION
The electrical supply connection point is located at the rear of the appliance; each heating zone has its own
supply. When connecting this electric appliance to the mains supply, ensure that the following is carried out:-
✔
An all-pole isolating switch is fitted within 2m of the appliance, but not on the appliance and in such a
position that the user does not have to reach across the cooking surface.
✔
Supply cord shall be oil-resistant, sheathed flexible cable and not lighter than ordinary polychloroprene or
other equivalent synthetic elastomer sheathed cord (as per AS IEC 60245-IEC-57)
✔
The branch supply line shall be individually overload protected to the correct current rating and the supply
cord shall be protected against any mechanical or thermal damage.
✔
A grommet is fitted around the wiring entry hole into the appliance.
✔
All wiring connections must be tight.
✔
Wiring colours:
3 phase 400V
1 phase 230V
Red
Live
Blue
Live
Neutral
Black
Live
Green
Neutral
Yellow/Green
Earth
⏚
Refer to the appropriate wiring stand for the size of cable that is to be supplied to an appliance for the current
drawn on that line. This will typically be 4 mm
2
per conductor for 400V and 2.5mm
2
per conductor for 230V.
