FanWorld FW14 Series, Инструкция по установке и эксплуатации, Страница: 90 / 288

Outdoor Unit
Installation
If you will install the unit on the ground or
on a concrete mounting platform , do the
following:
1. Mark the positions for four expansion bolts
based on dimensions chart.
2. Pre-drill holes for expansion bolts.
3. Place a nut on the end of each expansion bolt.
4. Hammer expansion bolts into the pre-drilled
holes.
5. Remove the nuts from expansion bolts, and
place outdoor unit on bolts.
6. Put washer on each expansion bolt, then
replace the nuts.
7. Using a wrench, tighten each nut until snug.
WARNING
WHEN DRILLING INTO CONCRETE, EYE
PROTECTION IS RECOMMENDED AT ALL
TIMES.
Models 2250/3000:
Model 4500:
90
Model 6000:
4
9
5
270 D
H
720 W
452 W1
727 W3
70 W2
1
5
8.
2
180.4
3
9
6.
0
2
4
5
2
8
1
D2 D3
33 B1
7
6
.5
49 A2