Fanvil X2C Скачать руководство пользователя страница 59

Страница: 59 / 64

59 / 64

10.5

Network Packets Capture

Sometimes it is helpful to dump the network packets of the device for issue identification. To get the

packets dump of the device, user needs to log in the device web portal, open page [System] -> [Tools] and

click [Start] in “Network Packets Capture” section. A pop-up message will be prompt to ask user to save the

capture file. User then should perform relevant operations such as activate/deactivate line or making phone

calls and click [STOP] button in the web page when operation finished. The network packets of the device

during the period have been dumped to the saved file. User may examine the packets with a packet analyzer

or send it to support.

10.6

Entering Post Mode and Recover System Image

WARNING! P

LEASE AVOID UPDATING SYSTEM IMAGE FROM

OST MODE UNLESS THE SYSTEM IMAGE IS

DAMAGED

If the device could not boot up and entered into POST MODE, it is usually because of system image

damaged due to power failure during software upgrade. When this occurs, users may follow below steps to

restore the system image.

Step 1.

Download the latest device software.

Step 2.

Setup a FTP server on a PC and put the downloaded software in the FTP repository. (Windows users

can download free FTP server software such as WFTPD32 or 3CDaemon)

Step 3.

Configure the PC with fixed IP address as 192.168.10.10

Step 4.

Connect device network with the PC.

Step 5.

Telnet from PC to device: >telnet 192.168.10.1

Step 6.

When telnet connection established, it will run POST maintenance tools, please select ‘2’ – FTP

update image, and fill in required information to start the image update.

Step 7.

Once update finished, please select ‘4’ to reboot the device.

Содержание X2C

































































Результаты поиска

Содержание X2C

Отзывы:

Похожие инструкции для X2C

Бренды по названию

Популярные бренды

Fanvil X2C, Руководство пользователя

Результаты поиска

Содержание X2C

Отзывы:

Похожие инструкции для X2C

Бренды по названию

Популярные бренды