Fanvil PA2 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 57

Fanvil PA2 Скачать руководство пользователя страница 9

3

5 Installation Guide

5.1 Use POE or external Power Adapter

PA2

, called as ‘the device’ hereafter, supports two power supply modes, power supply from external

power adapter or over Ethernet (POE) complied switch.

POE power supply saves the space and cost of providing the device additional power outlet. With a

POE switch, the device can be powered through a single Ethernet cable which is also used for data

transmission. By attaching UPS system to POE switch, the device can keep working at power outage

just like traditional PSTN telephone which is powered by the telephone line.

For users who do not have POE equipment, the traditional power adaptor should be used. If the device

is connected to both PoE switch and external power adapter, PA2 will get power supply from PoE

switch in priority, and change to external power adapter once the PoE power supply fails.

Please use the power adapter supplied by Fanvil and the POE switch met the specifications to ensure

the device work properly.

«
...
7
8
9
10
11
...
»

Содержание PA2


























































Отзывы:

Нет отзывов