8
6 Basic Introduction
6.1 Quick Setting
Before proceeding with this step, make sure your Internet broadband connection is working properly and
complete the network hardware connection. The default factory mode of is fixed IP address mode, which
is 192.168.1.128 by default.
◼
Long press the volume
down button on the device for 3 seconds (30 seconds after power on), and
the voice will automatically play the IP address of the device or use the "IP scan tool" software to
find the IP address of the device.
（
Download
http://download.fanvil.com/tool/iDoorPhoneNetworkScanner.exe
◼
Long press the volume up button for 10 seconds (30 seconds after power on), wait for the speaker
to emit rapid beep sound, then quickly press the volume up button for three times, the beep stops.
After waiting for 10 seconds, the system will automatically broadcast the IP address after
successfully switching to dynamic IP acquisition. Switch again to a fixed IP address.
◼
Login to the device's WEB page for configuration according to the IP address
◼
Configure the account, user name, server address and other parameters required for registration
provided by the service provider on the WEB configuration page;
Picture 3 - Quickly setting
6.2 WEB configuration
When the device and your computer are successfully connected to the network, enter the IP address of
the device on the browser as http://xxx.xxx.xxx.xxx/ and you can see the login interface of the web page
management.