Step One: Connect to the network
Connect the end of network cable to the device WAN port, another end is connected to the
LAN port of the router, then the hardware connection is completed. Normally, you should set
your network to DHCP mode.
Step Two: Get the device IP Address:
Methods:
1. Use the default IP scanner tool to get it: Network Scanner
1)
Install the scanner tool: Network Scanner;
2)
Ensure the working computer (installing IP scanner tool, exe.) is in the same local network
with the corresponding device;
3)
Run the tool (Network Scanner.exe), to search the IP address of corresponding device within
the network.
Method 2: Long Press
“#”key for 3 seconds, the intercom will report the IP numbers by itself.
SIP Speaker Configuration
No server mode
(P2P mode)
SIP Server mode
VOIP Phone
Audio stream
（
SIP/P2P
）
SIP Speaker
PC SIP Phone Software
Mobile SIP Phone Software
