Fanvil i55A, Руководство пользователя

Страница: 122 / 127

168
Basic Settings
Ringtone Duration Set the ringtone duration, default value is 5 seconds.
Input & Tamper
Server Address
Set remote server address. The device will send message to the
server when the alarm is triggered. The message format is
：
Alarm_Info:Description=i16SV;SIP
User=;Mac=0c:38:3e:3a:06:65;IP=; port=Input .
The message content can also be customized.
Input settings
Input Detect Enable or disable Input Detect
Triggered by
When choosing the low level trigger (closed trigger), detect the input
port (low level) closed trigger.
When choosing the high level trigger (disconnect trigger), detect the
input port (high level) disconnected trigger.
Triggered Action
Send SMS: Set the alert message send to server if selected.
Dss Key: The device will perform corresponding Dss Key
configurations if any key is selected, by default the value is none.
Triggered Ringtone: Select triggered ring tone.
Output Settings
Output Response Enable or disable Output Response
Triggered by DTMF
Ring tone
Select the DTMF trigger ring tone.
Triggered by URI
Ringtone
Select the URI trigger ring tone.
Triggered By SMS
Ringtone
Select the SMS trigger ring tone.
Triggered By Dsskey
Ringtone
Select the Dsskey trigger ring tone.
Standard Status
When choosing the low level trigger (NO: normally open), when meet
the trigger condition, trigger the NO port disconnected.
When choosing the high level trigger (NC: normally close), when meet
the trigger condition, trigger the NC port close.
Output Duration Set the output change duration time, the default is 5 seconds.
Trigger by DTMF
Enable or disable trigger by DTMF. The device will check the received
DTMF sent by remote device, if it matches the DTMF trigger code, the
device will trigger corresponding output port.
DTMF Trigger Code Input the DTMF trigger code, default value is 1234.
DTMF Reset Code Input the DTMF reset code, default value is 4321.
Reset By Reset the output port mode by duration or state.