Fanvil i30, Руководство пользователя

Страница: 21 / 54

[
键入文字
]
21
/ 54
Static
IP
Network parameters must be entered manually and will not change. All
parameters are provided by the ISP.
DHCP Network parameters are provided automatically by a DHCP server.
PPPoE Account and Password must be input manually. These are provided by your ISP.
If Static IP is chosen, the screen below will appear. Enter values provided by the ISP.
DNS Server Configured by Select
the
Configured mode
of the
DNS Server
.
Primary DNS Server
Enter the server address of the
Primary DNS
.
Secondary DNS Server
Enter the server address of the
Secondary DNS
.
After entering the new settings, click the APPLY button. The equipment will save the new settings and
apply them. If a new IP address was entered for the equipment, it must be used to login to the phone
after clicking the APPLY button.
Service Port Settings
Web Server Type Specify Web Server Type – HTTP or HTTPS
HTTP Port
Port for web browser access. Default value is 80. To enhance security, change this
from the default. Setting this port to 0 will disable HTTP access.
Example: The IP address is 192.168.1.70 and the port value is 8090, the accessing
address is http://192.168.1.70:8090.
HTTPS Port
Port for HTTPS access. Before using https, an https authentication certification
must be downloaded into the equipment.
Default value is 443. To enhance security, change this from the default.
Note:
1) Any changes made on this page require a reboot to become active.
2) It is suggested that changes to HTTP Port be values greater than 1024.Values less than 1024 are
reserved.
3) If the HTTP port is set to 0, HTTP service will be disabled.