[
䬂ܹ᭛ᄫ
]
Security functions Output port
CN11
6 5 4 3 2 1
NC2 COM
NO2
NC1 COM
NO1
Normally
close
common
port
Normally
open
Normally
close
common
port
Normally
open
Output port 2
Output port 1
2.
Quick Setting
The product provides a complete function and parameter setting. Users may need to have the
network and SIP protocol knowledge to understand the meaning represented by all parameters. In
order to let equipment users enjoy the high quality of voice service and low cost advantage brought by
the device immediately, here we list some basic but compulsory setting options in this section to let
users know how to operate without understanding such complex SIP protocols.
In prior to this step, please make sure your broadband Internet online can be normal operated,
and complete the connection of the network hardware. The product factory default network mode is
DHCP. Thus, only connect equipment with DHCP network environment that network can be
automatically connected.
¾
Press a
nd hold “#” key for 3 seconds and the door phone will report the IP address by voice
, or use
the "iDoorPhoneNetworkScanner.exe " software to find the IP address of the device.
Note:
when power on, 30s waiting is needed for device running.
¾
Log on to the WEB device configuration.
¾
In a SIP page configuration service account, user name, parameters that are required for server
address register
¾
You can set DSS key in the Webpage (Intercom -> function key).
¾
You can set function parameters in the Webpage (Safeguarding).
