Fanvil H2U, Руководство пользователя

Страница: 56 / 70

107
11.19 Phone settings >> MCAST
Using the multicast function, we can simply and conveniently send the announcement to
each member of the multicast, and send the multicast RTP stream to the preconfigured
multicast address by setting the multicast key on the phone.Listen for and play the RTP
stream sent from the multicast address by configuring the listening multicast address on
the phone.
DTMF Payload Type Enter the DTMF payload type, the value must be
96~127.
AMR Payload Type Set AMR load type, range 96~127.
Headset Mic Gain Set the earphone's radio volume gain to fit
different models of earphones.
Opus playload type Set Opus load type, range 96~127.
OPUS Sample Rate
Set Opus sampling rate, including opus-nb (8KHz)
and opus-wb (16KHz).
ILBC Payload Type Set the ILBC Payload Type, the value must be
96~127.
ILBC Payload Length Set the ILBC Payload Length
Enable MWI Tone When there is a new voice message message, the
phone will start a special dial tone.
Enable VAD Whether voice activity detection is enabled.
Onhook Time Configure a minimum response time, which
defaults to 200ms
EHS Type EHS headset is available after enabling.
RTP Control Protocol(RTCP) Settings
CNAME user Set CNAME user
CNAME host Set CNAME host
RTP Settings
RTP keep alive Hold the call and send the packet after 30s
Alert Info Ring Settings
Value Set the value to specify the ring type.
Ring Type Type1-Type9