PROBLEM POSSIBLE
CAUSE POSSIBLE
SOLUTION
Unit will not
operate
1. “On/Off” power button has
not been pressed.
2. Unit is not plugged in.
3. The air intake grill has not
been installed and locked
into place.
1.
Press the “On/Off” power
button.
2.
Check to make sure the unit is
plugged in.
3.
Check to make sure the filters
are properly installed and the
air intake grill is installed and
locked into place.
Reduced air
flow or poor
filtering
1.
The air intake or air outlet
grill may be blocked.
2.
The HEPA filter may be
clogged.
1.
Make sure nothing is in front of
or on top of the unit.
2.
Check the HEPA filter indicator
light. Replace the HEPA filter if
this indicator is lit.
The filter
indicator is lit
after the filter
has been
replaced.
1.
The unit has not been
reset.
1.
Turn on the machine, then
press and hold the TIMER
control button until the filter
indicator is off.
The power light
indicator lam p
flickers quickly
(5 tim es per
second).
1.
The unit needs to be
reset.
1.
Unplug the unit and reinsert the
plug after 10 seconds.
The filter
indicator light
flickers quickly
(5 tim es per
second)
1.
The unit needs to be
reset
1.
Unplug the unit and insert the
plug after 10 seconds.
10
TROUBLESHOOTING
This appliance was inspected thoroughly and was in good operating condition when it
was shipped from the factory. If a minor problem occurs, it usually can be solved quite
easily when the cause is found. Therefore, this checklist is provided for your
convenience.
FEATURES OF YOUR PROGRAMABLE AIR PURFIER
3
6.
Neutralize
The UV and photo-catalysis
process helps decompose
odors in the air like
formaldehyde, alcohol and
ammonia.
NOTE:
The neutralize function is a
silent feature, the only way to know if
it is “On” is with the indicator light.
7.
Fan Speed Settings
There are four fan speeds and an
auto fan speed setting to clean
your air more efficiently.
8.
Timer
Set the air purifier to shut off after
a specified number of hours.
9
.
Set-Up
Pre-program the unit to turn “On”,
turn “Off”, and select the fan
speed that would be desired.
10.
Change Filter Indicator
This indicator reminds you
when filters require replacing.
1.
HEPA Filter
The HEPA filter will stop most dust
particles and airborne allergens that
pass through the filter. It will capture
99.97% of particles as small as 0.3
microns – many times smaller than
a human hair.
2.
Ultraviolet Lamp
The ultraviolet lamp can help kill
bacteria and molds that pass
through the filter. The result is a
cleaner air output from the air
purifier.
3.
Ionizer
Filling the air with negative ions
helps to freshen the air.
NOTE:
The ionizer function is a silent
feature, the only way to know if it is “On”
is with the indicator light.
4.
Built-in Dust Sensor
Automatically adjusts the air flow
through the air cleaner to help
clean the air more efficiently.
5.
Built-In Odor Sensor
This sensor monitors the air quality
in the room and can detect
tobacco, pet, cosmetic and
alcohol-aerosol odors.
Содержание AP500H
Страница 2: ......
