Fantom Professional PROMIDI 250CP, Руководство пользователя

Страница: 11 / 28

• Unlock the locking latches pulling outwards to the right and left.
• Put the motor bonnet away through holding it from carrying handle.
• The tank should be clean and empty for carpet
shampoo function.
Note: Do not put water into your tank for carpet shampoo function.
• Put the motor bonnet back on the tank and lock the latches by pushing
right and left.
• Insert the hose by pushing it into the suction mouth. By pushing the
metal thin water hose to the by-pass adaptor.
• Connect elbow tube with spray trigger to the extension tubes by pressing
in, and extension tubes to each other. (You can operate your machine
without any tubes, too.) Then attach the carpet shampoo nozzle to the
extension tubes.
• Choose your suitable nozzle for the surface you want to clean. Plug the
jack on the nozzle by pushing to the trigger adaptor.
• Fill the shampoo tank with water and add 2-3 scale of shampoo
(non-foaming) in it. Insert the pin of the shampoo drawing pipe to its
connection place on machine by simply pressing.
Note: Always use the original and non-foaming carpet cleaning
shampoo. Otherwise this will damage the pump.
• In carpet cleaning function; connect elbow tube with spray trigger to the
extension tubes by pressing in, and extension tubes to each other. Then
attach the carpet shampoo nozzle to the extension tubes.
• Upholstery Cleaning function; insert the upholstery shampoo nozzle
directly to elbow tube with spray trigger. Insert the tip end of the
upholstery shampoo nozzle into the juction on the elbow tube with spray
trigger.
• Plug-in your machine’s cable to the power socket.
• Turn on the on-off switch to operate the device.
• Turn on the switch for shampoo delivery pump.
• Pull the trigger to spray the shampoo water on the floors you want clean.
Then stop pulling the trigger after spraying enough water. This will end
water spraying.
• When the dirty water has reached the highest permitted level in the tank,
buoy automatically blocks the suction. You should empty the dirty water
out of the tank.
• Certainly turn off the pump switch when water with shampoo is finished.
• Turn off the pump switch when it is not needed.
ASSEMBLY FOR CARPET SHAMPOO FUNCTION EN