Use and maintenance manual for fixed or folding corn harvesting header
EDITION 01/2016
57
3-ASSEMBLY
Replace the various shims, positioned
under the Z-shaped iron (LH side),
with the 8.5-mm shims supplied as
standard equipment.
Replace the washer DIN 6798. under
the last screw of the box with the
washer for M10 supplied as standard
equipment.
Position and screw in the Kit
Replace the fixing screw on the box
with the longer hex head screw 10x25
supplied as standard equipment.
LH
SIDE KIT
Loosen the screws of the Z-shaped
iron on the RH side and position the
cob snapping lade blade flush with the
cutting section, as shown in the picture.
