Use and maintenance manual for fixed or folding corn harvesting header
EDITION 01/2016
39
Varying the transmission box ratios
Proceed as follows to change the ratios
inside the box:
-
open the rear cover;
-
remove the two Seeger rings;
-
pull out the two gears from the splined
shafts;
-
assemble the new ratios;
-
reassemble the Seeger rings;
-
close the box.
Assembling the variable box
cylindrical gears
The following ratios can be supplied:
The gears can be assembled both
multiplying and reducing.
BE CAREFUL TO AVOID RUINING THE SEAL GASKET FITTED BETWEEN THE COVER
AND THE BOX.
SPARE GASKETS ARE AVAILABLE.
COMPLY WITH THE RECOMMENDED TIGHTENING TORQUES.
THE GEARS THAT MAKE UP THE PAIRS ARE NOT INTERCHANGEABLE ONE WITH
THE OTHER. THE 18-TOOTH GEAR OF THE 18/25 TORQUE IS DIFFERENT FROM THE
18/24 TORQUE.
MULTIPLYING
REDUCING
