Fantini Cosmi Intellicomfort+ CH180RF, Руководство пользователя

Страница: 14 / 54

14
GENERAL OR SINGLE ZONE OPERATION
On the CH180RF you can activate and display the main operating modes for the whole system or for a single zone.
To select a zone, exit the STAND-BY mode and press ZONE until the selected zone number is displayed. To assign a name to the
zone, see page 45.
To exit the zone, press ESC or after 30 seconds the CH180RF returns to the main screen.
NOTE:
•
If the LOCAL SET message appears in a zone, it means that the set-point for the fi nished time has been changed from
the CH120RF of the indicated zone (see TEMPORARY MODIFICATION in the CH120RF manual).
• If there WAIT appears in a zone it means that after the creation of the network no data relating to the selected zone
has arrived.
• Any function set by the MAIN SCREEN acts on the entire multi-zone system; while any function set in a SINGLE ZONE
only affects the concerned area.
MODE DISP
DAY ZONE
RH%
PROG ZONE
COPY
ESC
OFF
MODE DISP
DAY ZONE
RH%
PROG ZONE
COPY
ESC OFF
MAIN SCREEN SINGLE ZONE