Fantini Cosmi CH150, Руководство пользователя

Страница: 13 / 24

12
5. Press the ENTER key to move to the next day and repeat the steps from point 2 for the
other days of the week; the Holiday pattern is indicated as DAY 8. To return to the main
page of the programming menu, use the ENTER key to scroll all the eight days or keep
the ENTER key pressed for 3 seconds.
If no key is pressed for more than 3 minutes, the chronothermostat returns to the mode of
operation in use previously.
Restoration of the preset parameters
To restore the preset temperature patterns and temperature values (T1-T2-T3-
Temperature used in Manual, Temperature used in Jolly, Antifreeze temperature used in
OFF mode) press and hold down the
▲
and
▼
keys simultaneously when in temperature
pattern programming mode.
Display of the temperature detected by the separate probe
To display the temperature detected by the separate probe (only if configured as an
external or floor probe) it is essential for the chronothermostat to be configured (see
<<configuration of the chronothermostat>>) and for the probe to be connected.
To display the temperature read by the separate probe, press the key for the mode of
operation currently in use (the temperature will flash). To return the display to the
temperature detected by the chronothermostat, press the key for the mode of operation in
use once again (the temperature will no longer flash).