Fantini Cosmi C820RQ, Инструкция по установке и эксплуатации

Страница: 29 / 40

29 - ENG
C820RQ
Password
In order to prevent other users from changing the thermostat settings, a password can
be entered to lock the buttons.
To enable this function, choose an access code with a value from 1 to 999. This code
must be entered, followed by the MODE button, to access any thermostat setting from
the temperature control to basic or advanced parameters.
To disable the key lock, set the value to "0".
Stand-by
You can change the Stand-by activation time.
Default value = 5
5 ÷ 10 sec
ON = Display always on (*)
(*) Regulation only available for systems powered by a 230V power supply.
Display light intensity
To improve the visibility of the LEDs in the room or to soften their light intensity level,
the default value can be changed.
Default value = 5
1 ÷ 10
Temperature correction
If the thermostat is close to heat sources or cold current areas, it is possible to correct
the measured temperature value.
Default value = 0°C
-4.0°C ÷ +4.0°C
BASIC SETTINGS MENU