Fantech HEPA DM 3000P, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 20

4
fantech
Introduction
HEPA Air Filtration Systems
You have purchased a very effective air cleaning and treatment system incorporating HEPA (High Efficiency Particulate Arrestance) filter technology.
This is the type of air cleaning equipment that respiratory specialists recommend most. To optimize the performance of your HEPA Filtration System, it
should be installed by a professional contractor who is familiar with your indoor air quality situation and the operation of other heating, ventilation and
air conditioning equipment that you may have.
A C
B
Specification
5" x 10'
(127 mm x 254 mm)
Negative pressure port of pressure switch
CONTINUOUS / OFF/ STANDBY Rocket Switch
Positive Pressure Port
of Pressure Switch
5' Cord - 3 prong plug
Model A B C
in mm in mm in mm
DM 3000P 16 406 20 508 10 1/2 268
Operation
Your Fantech HEPA filtration system incorporates three stages of filtration. Air is drawn from the house via one of the installation examples, found
in this manual, by a powerful efficient EBM fan. The air is cleaned as it passes through the filters, where it is then reintroduced back into the home,
cleaned of the majority of harmful particles.
The DM3000P includes a differential pressure switch. When rocker switch is set to "STANDBY" the DM3000P will remain OFF until the pressure
switch detects airflow in the forced air system's duct. As airflow is detected, the DM3000P is turned ON. When the rocker switch is set to
"CONTINUOUS" the DM3000P will operate continuously irregardless of the forced air system's operation. Finally, when the rocker switch is set to "OFF"
all power to the DM3000P is disengaged.
A semi-annual service schedule must be followed to ensure the HEPA unit is operating at its full potential.