Fantec MM-XHD7, Руководство пользователя

Страница: 12 / 46

FANTEC FULL HD Media Player
ENGLISH
12
27 FLASH-BOOT Loads embedded options in flash files. Please press
FLASH-BOOT during flash file playback to load the
option interface.
28 GO TO Go to a specified time during video playback
29 16:9/4:3 Change the TV mode during video playback
30 DEVICE In Main Menu press to switch between the HDD,
USB drive and card reader
3. System Start-up
3.1 HDD Format
For users who wish to install a new SATA HDD into the player, please refer to the
following procedures to format the hard disk on the player before usage.
At first you must format the hard disk of the player at a PC. Format your HDD in
NTFS or in FAT32 with a FAT32 format tool, like Swissknife or EASEUS Partition
Master or use the Windows formatting tool.
3.2 TV Mode
Connect and set up media player and TV, then connect to power and turn on turn on.
After a few seconds the media player enters the Main Menu .
Note: All available external storage devices are shown in blue colour on the right
upper corner of the Main Menu .