Fantec DS-X2U3-Glanz, Руководство пользователя

Страница: 22 / 29

22
FANTEC DS-X2U3-Glanz DOCKING STATION
LED Status in Cloning mode
About cloning
LED Status
25% 50% 75% 100%
HDD A
(front)
POWER
HDD B
(back)
2 drives installed,
Cloning started
The four upper colored LEDs flash cyclically
from left to right and back.
Cloning procedure
LEDs light up alternately back and forth. Status
is signaled by permanent glow: 25%, 50%,
75% and ready.
Power, HDD A and HDD B also
light up permanently.
Cloning finished All LEDs are permanently on
1. All data on the Destination drive will be lost once the cloning
procedure starts.
2. The capacity of the Destination drive must be equal or bigger
than the capacity of the Source drive. If the capacity is bigger,
the capacity remaining after cloning, can be formulated to a new
partition.