Fantec AluDOCK2X, Руководство пользователя

Страница: 22 / 29

22 FANTEC AluDOCK2X Docking Station
LED Status in Cloning mode
About cloning
LED Status
USB
25%
POWER
50%
SLOT 1
75%
SLOT2
100%
2 drives installed,
Cloning started
Solid orange LED for every 25% progress
Cloning procedure Orange LED moving from left to right
Cloning finished All LED blinking orange
Cloning failure Solid red
1. All data on the Destination drive will be lost once the cloning
procedure starts.
2. The capacity of the Des tination drive must be equal or bigger
than the capacity of the Source drive. If the capacity is bigger,
the capacity remaining after cloning, can be formulated to a new
partition. Follow the formatting guide in this manual for further
instructions.
3. If the Source drive was initialized using MBR/GPT/APM partition
scheme, the copied drive will be the same partition scheme, too.
Even if the Source drive is completely empty, the Destination drive
will become empty as well.