21
FANTEC AluDOCK2X Docking Station
7) u
SIng
thE
dEvIcE
for
clonIng
Important notE:
For cloning make sure your Main Drive (Source) is in Slot 1 and your
Slave Drive (Destination) in Slot 2. The destination drive in Slot 2 is not
allowed to have less capacity than the source drive.
1. Connect the power adapter to wall outlet and to the docking station
2. Make sure the USB interface is not connected and the device is
working in standalone mode.
3. Insert your Source drive into Slot 1 and the Destination drive
into Slot 2.
4. Turn on the power switch on the back
[All LED will flash and Power LED will stay ON]
5. Wait for about 15-20 seconds to let the drive spin up and being
recognized by the docking station.
6. Press and hold the Clone button for 5 seconds and then the cloning
procedure will start.
7. Each LED represents 25% completion. It is only when every 25% of
HDD1 is duplicated to HDD2 that such LED will remain constantly on,
leaving the other LED(s) scrolling back and forth. When cloning
operation is fully completed, all LEDs will flash regularly until the
device is power off.
Содержание AluDOCK2X
Страница 14: ...14 FANTEC AluDOCK2X Docking Station 5 Festplatte wird formatiert 6 Festplatte fertig formatiert ...
Страница 27: ...27 FANTEC AluDOCK2X Docking Station 2 HDD initialize 3 Click Erase 4 Click Erase ...
Страница 28: ...28 FANTEC AluDOCK2X Docking Station 5 HDD format in process 6 Format completed ...
