You will need:
Step 9
Step 10
1x
Door Handle/Foam Insert
(H11)
You will need:
1 x
Strike
Plate/Foam
Insert
(H10)
H10
H11
Note:
This installs the door to open from the left.
If you have set up the magnetic catches in step 7
to open from the right, please install the door
from the left side.
H10
2 x
Sleeve
(H15)
Door
(P6)
H15
Page 9
Loosen the door hinge (H8) on the top of Door (P6) with a Phillips screw driver.
Insert the top hinge into the sleeve (H15) on the Top (P5).
Slide the top corner of Door (P6) into the hinge.
Tighten the bolts on the top door hinge with a Phillips screw driver.
Remove the foam insert from the Strike Plate (H10).
Peel off the backing from foam insert and paste it onto the bottom
corner of the Door (P6). Slide the Strike Plate (H10) into position.
Repeat with the Door Handle (H11) at the top corner of the door.
Insert a Sleeve (H15) each into the Top (P5) and
Base (P1).
Place the door (P6) with its hinge into the Sleeve
(H15) in base (P1).
H15
