Read Instructions carefully.
Check no parts are missing
Lay out all of the components on a soft surface
as if you were preparing to do a jigsaw puzzle.
Separate and identify each component from the
hardware pack and rest each one in its proper
location before fastening.
DO NOT
fully tighten screws (leave slightly
loose). When the item is fully assembled
tighten the screws
– but do not over tighten.
DO NOT
set glue until you are certain that the
parts belong together.
Carefully identify each component, especially
those that are similar. The most common mistake
is getting things back to front.
Page 2
