You will need
Step 4
You will need
Step 5
Page 8
fantasticfurniture.com.au
Phillips Head
Screwdriver
Phillips Head
Screwdriver
(P2)
(P1)
(P1)
(P3)
H4
H1
H4
H1
H4
H1
H4
H1
Insert 4 x Dowels (H1) into 2 x Top/Bottom Panels (P1).
Insert 4 x Cam Nuts (H4) into the holes of 2 x Top/Bottom Panels (P1).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Left Side Panel (P2) into place and tighten the cam nuts.
4 x Cam Nuts
(H4)
4 x Dowels
(H1)
Make sure raw edge
is facing up.
(P2)
(P5)
(P3)
(P5)
This is how a cam lock works.
.......
The head of the cam
nut screw goes into
the open mouth of
the cam lock. You
then turn the cam
lock so it tightens
Adjust the opening of cam locks is facing the cam nut screws,
then push Shelf Panel (P5) into place and tighten the cam locks.
