You will need
Step 2
You will need
Step 3
Page 7
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Phillips Head
Screwdriver
(P2)
(P3)
H3
H3
H3
H3
H3
H3
H18
H18
H3
H3
H18
H18
1
25
25
1
Attach 8 x Cam Bolts (H3) into Side Panels (P2, P3).
Attach 4 x Cam Nut Screws (H18) into Side Panels (P2, P3).
8 x Cam Bolts
(H3)
4 xCam Nut
Screws (H18)
Phillips head
screwdriver
(P3)
H4
H4
H4
(P1)
(P1)
Insert 4 x Dowels (H1) into 2 x Top/Bottom Panels (P1).
Insert 4 x Cam Nuts (H4) into the holes of 2 x Top/Bottom Panels (P1).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach 2 x Top/Bottom Panels (P1) to Right Side Panel (P3), then tighten the cam nuts.
Make sure raw edge
is facing up.
H1
H1
H1
4 x Cam Nuts
(H4)
4 x Dowels
(H1)
