Page 8
fantasticfurniture.com.au
You will need
Step 5
You will need
Step 6
Phill
i
ps
H
ead
Screwdriver
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
(H1)
(H1)
(H1)
(H5)
(H5)
(H5)
(H1)
(H1)
(H5)
P39
P37
P38
P38
Phillips Head
Screwdriver
7 x Cam Nuts
(H1)
(H5)
P40
(H24)
(H1
3
)
(H1
3
)
(H25)
1 x Caster With
Brake (H25)
(H24)
1 x Caster
(H1
3
)
8 x Screws
6 x Small Dowels
Insert 3 x Cam Nuts (H1) and 2 x Small Dowels (H5) into
the Shelf Back Panel (P39). Rotate the cam nuts so the arrows face the incoming bolts. Insert
4 x Cam Nuts (H1) and 4 x Small Dowels (H5) into the 2 x Shelf Panels (P38).
Rotate the
c
am
n
uts so the arrows face the incoming bolts.
Attach the Shelf Front Panel (P37) to the 2 x Shelf Panels (P38) and Shelf Back Panel (P39), by
aligning the holes and tightening Cam Nuts with a Phillips Head Screwdriver.
Attach the Caster (H2
4
) and Caster with Brake (H2
5
) to Shelf Base Panel (P40)
with 8 x Screws (H13), tightening with a Phillips Head Scr
ewdriver.
