Page 8
Step 7
fantasticfurniture.com.au
(
P7
)
(
P3
)
(
P4
)
(
P5
)
Slot the Back Panel (P7) into the grooves of panels (P3, P4 & P5) as shown.
Raw
side facing
inside
Step 8
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
(
P1
)
(
P3
)
(
P4
)
Phill
i
ps
H
ead
Screwdriver
You will need
(H5)
4 x Cam Nuts
(H5)
Insert 4 x Cam Nuts into Left Side Panel (P3) and Right Side Panel (P4).
Attach the Top Panel (P1) to the Left Side Panel (P3) and Right Side Panel (P4) by aligning the
Dowels (H7) and Cam Bolts (H6) to the holes as shown.
Ensure that the Back Panel (P7) is slotted into the groove of the Top Panel (P1) as well.
Tighten the Cam Nuts (H5) with the Phillips Head Screwdriver in the Left Side Panel (P3) and
Right Side Panel (P4) to lock into position.
