Page10
fantasticfurniture.com.au
Insert 5 x Cam Nuts into the Drawer Side Panels (P9 & P10) and Drawer Support Panels (P14).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach the Drawer Front Panels (P12, P13 & P15) to the Drawer Side Panels (P9 & P10), by tightening
Cam Nuts with the Phillips Head Screwdriver.
Repeat for the remaining drawers.
Step 11
(H5)
(H5)
(
P9
)
x 4
(
P10
)
x 4
(H5)
(
P14
)
x 4
(P12) x 2
(P13) x 2
(P15)
Phil
li
ps
H
ead
Screwdriver
You will need
2
5
x Cam
Nuts
(H5)
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
Step 12
Slot in the Drawer Base Panel (P11) into the grooves of panels (P9 & P10) and Drawer
Front Panels (P12, P13 & P15) as shown.
(
P11
)
x 5
(
P9
)
(
P10
)
(
P14
)
Raw
side
fac
ing
bottom
(P12) x 2
(P13) x 2
(P15)
