www.fantasticfurniture.com.au
PAGE 5
You will need
Step 1
You will need
Step 2
8 x Cam Bolts
(H3)
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 3 x Small Dowels (H2) into the hole of LF Leg (P7) as shown.
Insert 2 x Cam Nuts (H4) into the holes of Rail (P4) and Side Panel (P2).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Rail (P4) and Side Panel (P2) to LF Leg (P7), then tighten the cam nut.
(P7)
(P4)
(P2)
(P7)
(P8)
(P9)
(P10)
H4
H4
H2
H2
H2
Insert 8 x Cam Bolts (H3) into the hole of Legs (P7, P8, P9, P10) as shown.
H3
H3
H3
H3
H3
H3 H3
H3
2 x Cam Nuts
(H4)
Flat head
screwdriver
3 x Small
Dowels (H2)
