(P12)
H10
H10
H10
H10
Screw 4 x Small Cam Bolts (H10) into Drawer Front (P12) with a Phillips head screwdriver.
Phillips head
screwdriver
4 x Small Cam
Bolts (H10)
You will need
Step 18
(P16)
(P14)
(P14)
(P15)
(P15)
Slide Drawer Base (P16) in through the grooves
on Drawer Sides (P14, P15).
H11
H11
H11
H11
Insert 4
x
Small Cam Nuts (H11) into the holes
of Drawer Sides (P14, P15).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Align the holes together, secure Drawer Sides (P14, P15) into place and
tighten the cam nuts using a Flat head screwdriver.
You will need
4 x Small Cam
Nuts (H11)
Step 19
Flat head
screwdriver
www.fantasticfurniture.com.au
PAGE 13
(P12)
Step 20
Make sure the grain
on drawer bottom is horizontal
before sliding into groove.
