H10
H10
H11
H11
H11
H11
H11
1 x
Dowel
(H1)
Page 9
Step 14
You will need:
5 x Small Cam
Bolts
(H10)
Step 15
Step 16
You will need:
(P10)
(P10)
(P10)
(P14)
(P12)
(P12)
(P13)
(P16)
(P13)
Insert 1 x Dowel (H1) into Drawer Front (P10).
Attach 5 x Small Cam Bolts (H10) as shown.
5 x Small Cam
Nuts
(H11)
Slide Drawer Base (P14) into the groove in Drawer Sides (P12,P13).
Insert 5 x Small Cam Nuts (H11) into the holes
of
Drawer Sides (P12,P13) and Support Rail (P16).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Drawer Side (P12,P13) and Support Rail (P16) into place and tighten the cam nuts.
H10
H10
H10
H1
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
