Step 9
Step 10
PAGE 9
Attach Side Plinth (P10) to Right Side (P3) with 2 x Large Screws (H4) by tightening
with a Phillips head screwdriver.
Insert Cam Nuts (H2) into Left Side (P2), rotate the Cam Nuts (H2) so the arrow is
pointing towards the incoming Cam Bolts (H1).
To secure the Left Post (P8) to the Left Side (P2) use the Phillips Head screwdriver to
tighten the Cam Nuts (H2).
(P3)
(P10)
(H4)
2 x Large Screws
(H4)
Phillips head
screwdriver
You will need
(H4)
6 x Cam Nuts
(H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Phillips head
screwdriver
You will need
Ensure sloping edge of
Side Plinth is in correct
position
.
