Step 17
Step 18
PAGE 13
Insert Cam Nuts (H2) into Left and Right Side Panels (P2, P3). Rotate the Cam Nuts (H2) so the
arrow is pointing towards the incoming Cam Bolt (H1). To fix the Left and Right Sides (P2, P3) to the
Top Panel (P1), use the Phillips Head screwdriver to tighten the Cam Nuts (H2). Use 2 x Large
Screws (H4) to fix the Front Rail (P4) to the Top Panel (P1) using the Phllips Head screwdriver.
Ensure the top Back Panel (P11) is slotted firmly into the groove of the Top Panel (P1)
before securing all Back Panels. Use the Back Panel Screws (H9) in between the Back
Panels to secure the Back Panels (P11 x 5) to the Shelves (P5 x 4) by tightening with
the Phillips Head screwdriver.
(P2)
(H4)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
2 x Large Screws
(H4)
Phillips head
screwdriver
You will need
4 x Cam Nuts
(H2)
(H4)
Phillips head
screwdriver
You will need
8 x Back Panel
Screws (H9)
(P11)
(H9)
(P1)
