9
Fantasea Radiant 1000X Dive & Video Light Instruction Manual 20151228
CARE & MAINTENANCE
1.
After each dive, carefully soak and rinse exterior components in fresh water.
2.
Visually examine the two O-ring seals found below the threads of the body of the light prior to
replacing the LED head. Any sand, dust or hair lines must be removed from this area in order to
ensure a perfect watertight seal.
3.
In case of a damaged O-ring, replace it with a replacement O-ring. After an O-ring replacement has
been made and the light has been reassembled, make sure to test the watertight seal of the light
prior to diving with it. Simply soak the light in shallow water, making sure no bubbles are escaping
from it and that no water is entering the light.
4.
Store the Radiant 1000X Light in a protected, dry and shaded area.
5.
Remove the battery when storing the LED light for an extended period of time.
6.
The Radiant 1000X Light should only be operated using quality brand batteries, such as those
supplied by Fantasea Line. Poor quality 18650 batteries might damage the light, negatively affect
its performance and will void the warranty.
7.
Avoid disassembling any parts of the light other than removing the LED head from the body so that
batteries can be installed and removed. Do not attempt to disassemble the LED head.
8.
There is never a need to use force when removing or reinstalling the LED head to the body of the
light or to turn the light on or off. If force is required then that is an immediate indication that
something is not right.
Image #7
Image #8
