to the housing by tying its secure string
left side of the housing.
back of the housing. First install the anti
gently and carefully stretch it downwards to install it on the bottom rail
sitting securely on both upper and lower rails
f.
It is important that a first dive with the housing is
order to verify that the housing watertight seal has not been affected during transport
and after long periods o
FRX100 VA R Housing Instruction Manual
14
to the housing by tying its secure string around the lower rectangular loop at the bottom
left side of the housing. Install the anti-glare hood over the anti-glare hood r
back of the housing. First install the anti-glare hood over the top rail (image #3) and then
gently and carefully stretch it downwards to install it on the bottom rail
securely on both upper and lower rails (image #4).
first dive with the housing is always made without the camera in
order to verify that the housing watertight seal has not been affected during transport
long periods of storage.
Image #1
Image #3
Instruction Manual 20200225
around the lower rectangular loop at the bottom
glare hood rails at the
glare hood over the top rail (image #3) and then
gently and carefully stretch it downwards to install it on the bottom rail, making sure it’s
made without the camera in
order to verify that the housing watertight seal has not been affected during transport
Image #2
Image #4
