eliminating shadowing effects and photographing in deep water,
recommended. For further information, please refer to the section “External Flashes”
2.
In order to make use of the built
housing. Insert your fingers beneath the adaptors installed inside the plate and
upwards till it is removed from its slot. Make sure the fiber optic cable plate is secured to the
housing by the dedicated secure
3.
The removable flash diffuser included assists with
softening the built-in flash output, increasing its
angle of coverage and decreasing the amount of
backscatter
in the images
(
the unattractive
snowstorm effect of the flash reflecting off
suspended particles in the water).
a.
In order to install the flash diffuser,
align it against the housing lens port so the
concave side of the flash diffuser is facing
the lens port (Image #1
b.
Gently push the flash diffuser against the
housing lens port till it clicks.
c.
Attach the flash diffuser quick release secure st
to the housing in order to avoid losing the flash diffuser underwater
d.
In order to remove the flash diffuser from the housing, gently push it outwards first from its
top and then from the bottom.
4.
It is best to set the camera flash mode to “Flash Always” as
compositions for the purpose of
flash fires on every image taken
instruction manual for further instructions regarding such settings.
5.
Rotate the
Flash Up Switch
clockwise (pulling it toward the back of the housing) in order to pop up
the camera built-in flash.
6.
Note that once the camera’s buil
Right
control and selecting the
have any effect on the built-in flash.
FG7X III R Housing Instruction Manual
20
eliminating shadowing effects and photographing in deep water, an accessory slave flash is
or further information, please refer to the section “External Flashes”
In order to make use of the built-in camera flash, remove the Fiber Optic Cable Plate from the
nsert your fingers beneath the adaptors installed inside the plate and
upwards till it is removed from its slot. Make sure the fiber optic cable plate is secured to the
housing by the dedicated secure line in order to avoid losing it during the dive.
included assists with
in flash output, increasing its
angle of coverage and decreasing the amount of
the unattractive
of the flash reflecting off
suspended particles in the water).
In order to install the flash diffuser, hold and
align it against the housing lens port so the
concave side of the flash diffuser is facing
the lens port (Image #15).
Gently push the flash diffuser against the
housing lens port till it clicks.
Attach the flash diffuser quick release secure string to the other side of the string connected
to the housing in order to avoid losing the flash diffuser underwater.
In order to remove the flash diffuser from the housing, gently push it outwards first from its
top and then from the bottom.
o set the camera flash mode to “Flash Always” as artificial light is required in most
compositions for the purpose of color and light reproduction. This will ensure the
flash fires on every image taken regardless of ambient light available. Please refer to the
instruction manual for further instructions regarding such settings.
clockwise (pulling it toward the back of the housing) in order to pop up
Note that once the camera’s built-in flash has been popped up it can be turned off using the
the “Off” option. Rotating the
Flash Up Switch
counterclockwise will not
in flash.
Instruction Manual 20200220
an accessory slave flash is
or further information, please refer to the section “External Flashes”.
flash, remove the Fiber Optic Cable Plate from the
nsert your fingers beneath the adaptors installed inside the plate and push the plate
upwards till it is removed from its slot. Make sure the fiber optic cable plate is secured to the
in order to avoid losing it during the dive.
ring to the other side of the string connected
In order to remove the flash diffuser from the housing, gently push it outwards first from its
is required in most
nsure the built-in camera
Please refer to the camera
clockwise (pulling it toward the back of the housing) in order to pop up
in flash has been popped up it can be turned off using the
Flash /
counterclockwise will not
Image #15
