Fanstel ST250, Руководство пользователя

Страница: 17 / 27

Page 14
#00
ENTER NUMBER>
#00
4809484928
USE SAVE TO END
SAVE TO?
4809484928
ENTER NAME>
USE SAVE TO END
2. Press the
σ
button or the
τ
button until the record you want is displayed.
3. You can also press the appropriate keypad button one or more times to reach the first
character of the name for which you are searching. For example, by pressing
5, 5
(two times), the first record with a name starting with “
K
” is displayed. Press the
τ
button and the next
K
listing is displayed.
4. To dial the number displayed, lift the handset and press the
Dial/Enter
button. If you
press the
Dial/Enter
button without lifting the handset, the speakerphone is activated
automatically before dialing.
5. To leave the directory mode at any time, press the
Goodbye
button.
Deleting Entries in the Directory
To delete an individual entry in the directory, press the
Delete
button once when the entry
is displayed. The displayed entry is permanently erased.
To delete all of the entries stored in the directory:
1. Press
the
Directory
button.
2. Press and hold the
Delete
button for 4 – 5 seconds until “
DELETE ALL!
” appears.
All entries in the directory are permanently erased.
Storing a New Number and Name in the Memory Buttons
To store a new number and name in the memory buttons:
1. Press the
Save
button when the display shows no
caller’s number or name. The “
SAVE TO?
” prompt
appears on the display.
2. Press the memory button where you wish to store
this telephone number (e.g.,
M1)
. The “
ENTER
NUMBER>
“ prompt appears on the display.
3. Use the keypad to enter the telephone number,
including the long distance prefix that you need to
dial this number. Insert a pause or multiple pauses
where required by using the
Redial/Pause
button.
Then press the
Save
button.
Note: If you need to dial an outside line access code,
do NOT include the outside line access code in the
phone number you entered. The outside line access
code is dialed automatically if you entered it during
the “Installation” procedures.
4. The third line of LCD displays “
ENTER NAME
” and
“
USE SAVE TO END
”, alternatively
5. Use the keypad to input the first character of the
name. The number and letters on each telephone
button are displayed in turn.