Page 4
Menu
button: Press to begin or to end display language selection and area code
programming.
Flash
button: Press during a call to access calling features by the telephone
company.
Memory
buttons: These memory buttons can be pre-programmed with number
and name for one-touch dialing.
Hold
button: Press to put a call on hold.
Installation
1. Plug one end of the flat telephone line
cord into the line jack on the back of the
phone where it is labeled "
TEL.LINE
" and
plug the other end into your modular
telephone wall jack.
2. Connect the AC adapter to an electrical
wall outlet and then connect the AC
adapter plug to the “
DC 9V”
jack on the
back of the phone.
Use only with a Class 2 power source, plug polarity,
9V DC, AC adapter.
3. Connect one end of the coiled
Handset Cord
to the jack on the left side of
the phone and connect the other end of the coiled Handset Cord to the jack on
the handset.
4. If you wish to use an Answering Machine, Modem, Fax Machine or other
devices along with your Caller ID telephone, you may plug one of these
devices into the "
DATA
" jack on the right side of the phone. The important
thing to remember is that for the Caller ID features to work properly the Caller
ID telephone must be plugged directly into the wall jack and other devices must
be plugged into the Caller ID phone.
