Fanstasy Spas MUSE, Руководство пользователя

Страница: 21 / 28

18
SPA MAINTENANCE
SURFACE CARE
Do not use solvents or abrasive cleaners to clean the spa. Typically, a mild detergent and water
will resolve cleaning issues.
COVER CARE
Please keep your cover free from dirt at all times. Use a cover cleaner or a warm mild soapy
water to clean the surface. Do not use any silicone-based products, as it will dry and may
eventually crack the vinyl. NOTE: Do not stand on the cover at any time. Remove the cover when
adding chemicals to your spa. This will extend the life of your cover. The gasses from burned off
chemicals will be trapped under the cover, if not removed. These gasses may erode the protective
lining of the foam inserts. This will not be covered under warranty.
CABINET CARE
Little maintenance is required to keep your spa cabinet looking good.
Spa cabinet product should be cleaned as needed to remove dirt and debris.
• NO abrasive or harsh chemicals should be used on the spa's cabinet.
• NO solvents or cleaners containing aromatic solvents should be used on the spas cabinet.
• Hot soapy water is the best choice for cleaning the spa's cabinet.
AVOID PROLONGED EXPOSURE TO DIRECT SUNLIGHT OR EXCESSIVE TEMPERATURES
(100 ºF or 38 ºC) TO AVOID YOUR SPA CABINET FROM BUCKLING.
SPA LED REPLACEMENT
• Turn OFF the power to the spa.
• Remove the equipment compartment access door.
• Locate the rear of the spa light.
• To remove the LED board, turn outside housing counter clockwise ¼ turn, and pull out and
remove LED board from socket.
• Replace by reversing the above steps.