FANOX SIA-B Series, Руководство пользователя

Страница: 82 / 138

www.fanox.com Rev. 07 82/138
7.7. MENUS
7.7.1. Standby mode screen
The default screen shows the device model and the currents in phase A, phase B, phase C, and
Neutral. Press “OK” to select a menu: measurements, states, settings, and events. If the HMI is left
in any state, it will return to the default screen after 5 minutes without any key being pressed.
SIAB110FD132AC
0.00 0.00 0.00 0.00
C
IA IB IC IN
0.00 0.00 0.00 0.00
C
Free text
0.00 0.00 0.00 0.00
C
SIAB110FD132AC
0.00 0.00 0.00 0.00
If any error is detected by the self-diagnosis, an error message appears in the second line (instead
of the currents) on the main screen, which can show any of the following information: (see inside
self-diagnosis section).
•
NO TRIP POWER
•
MEASUREMENT ERROR
•
EVENTS ERROR
•
EEPROM ERROR
•
DATE & TIME ERROR
7.7.2. Accessing the menus
The keys ▲, ▼, ◄ and ► are used to navigate through the different options and menus. The “
OK
”
key is used to accept and to enter and menu or an option. The “
C
” key is used to move up through
the menu levels.
It is not necessary to enter any password to read or view the parameters, measurements or
settings…
A 4-character password must be entered in order to modify any parameter.
After returning to the main screen, the password must be entered again to make any further
modifications.
The keys ◄ and ► are used to navigate from one item to another within a parameter. The keys ▲
and ▼ are used to increase or decrease the value. If an invalid value is entered during the process,
the “
C
” key can be used to delete it.
The navigation through the menus is described as graphically as possible below.